Dolex Edge Protection Plate – reliable edge protection
The Dolex edge protection plate reliably protects your 35 mm lashing straps from abrasion, edges and wear. With this PU edge protection, you extend the service life of your straps and secure transports noticeably more effectively.
Reliable protection in everyday use
The plate is made of robust, dimensionally stable PU material and fits precisely over the edge where your lashing strap runs. This distributes the tension forces evenly and prevents chafing on the webbing.
With a length of 250 mm and a width of 80 mm, the edge protection plate fully covers typical contact points without restricting the function of the strap. The low thickness of 5 mm allows flexible use, even when space is limited.
This edge protection plate is ideal for applications with 35 mm lashing straps – perfect for small to medium transport tasks. The PU structure does not absorb moisture, remains stable and offers reliable performance even under changing temperatures.
You not only protect the webbing but also your cargo from localized pressure points. At the same time, you increase transport safety because the straps stay usable for longer. The plate can be positioned quickly and supports you wherever rough or hard edges are unavoidable.
Technical Data
• Length: 250 mm
• Width: 80 mm
• Thickness: 5 mm
• Material: PU
• For 35 mm lashing straps
• Application: abrasion protection for lashing and tie‑down straps
Accessories & Recommendations
• 35 mm lashing straps from the DoZurr series
• Anti‑slip mats in various thicknesses for additional load stability
Frequently Asked Questions
Which straps does the edge protection plate fit?
It is ideal for 35 mm lashing straps.
Is the PU edge protection weather‑resistant?
Yes, PU does not absorb moisture and remains dimensionally stable even when temperatures change.
When should I use an edge protection plate?
Whenever straps run over rough, hard or sharp‑edged surfaces.
| EAN | 4032378620012 |
| Commodity code | 39172900 |
| ECLASS-Basic 15.0 (en) | 20.429.090 |
Edge and Corner Protectors
Edge protectors are designed to protect lashing straps and the load during transport. To ensure safe use, the following instructions should be observed:
- Application and Compatibility
- Use edge protectors only for their intended purpose.
- Check compatibility with the lashing straps being used.
- Before Use
- Inspect the edge protector for visible damage, cracks or deformation. Damaged edge protectors must not be used.
- Ensure that the edge protector is securely positioned on the edge of the load and cannot slip during use.
- Correct Positioning
- The edge protector must completely cover the edge requiring protection.
- Ensure that the lashing strap passes correctly through the designated guide of the edge protector (e.g. threading slot).
- Use Under Different Conditions
- When used in extreme temperatures, humid environments or when exposed to chemicals, ensure that the selected edge protector is suitable for these conditions.
- Carry out a visual inspection before and after each use, particularly after intensive use or contact with aggressive substances.
- Storage
- Store edge protectors in a dry and clean environment, protected from UV radiation and extreme temperatures, to preserve the service life of the material.
- Do not store edge protectors under heavy loads or in a deformed condition.
Seminars 2026.
