Accessories for lifting-chains.
At Dolezych you can buy various accessories for your lifting-chains. The accessories for lifting-chains in the DoComfort and DoComfortMax product line offer a comprehensive selection, including coupling links, fork connectors, shackles and more. Grade 8 and 10 equalizing shackles allow for even loading of individual strands and perpendicular lifting of loads on multi-leg lifting-chains. Container hooks, skip hooks and eyelets in grade 8 and 10 serve as end fittings for lifting-chains. Spindle tensioners facilitate the installation of the lifting-chain via the clevis connection and enable precise length adjustment of chain strands. Other accessories include chain gauges, load plates, test plates, connectors and shackles. The Do AS sling stand enables the storage of ropes, chains and lifting accessories.
Immediately ready for shipment
Immediately ready for shipment
Immediately ready for shipment
Immediately ready for shipment
Immediately ready for shipment
Currently being reproduced
Immediately ready for shipment
Immediately ready for shipment
Immediately ready for shipment
Immediately ready for shipment
Immediately ready for shipment
Immediately ready for shipment
Currently being reproduced
Immediately ready for shipment
Accessories for lifting-chains from the DoComfort and DoComfortMax product line
- DoComfort accessories, coupling link, fork connector
- DoComfort accessories Shackles & fork connectors
- DoComfort accessories Suspension links/sets
- DoComfort accessories Type A suspension heads with fork connectors
- DoComfort accessories Special suspension links with fork connectors
- DoComfort accessories Clevis hooks, eye hooks and wide-mouth hooks
- DoComfort accessories Self-closing hooks and chain swivels
- DoComfort accessories Shortening claws and parallel hooks
- DoComfort accessories Compensating rocker, insertion bolts and safety latches
- DoComfortMax accessories
Lifting equipment stand
The Do AS lifting equipment stand is characterized by a free-standing steel construction that does not need to be fixed to the floor. It is suitable for storing ropes, chains, lifting slings, round slings and loading harnesses. It can be optionally equipped with a roller set.
Special chain components
You can buy the following special chain components from Dolezych:
- Fork hook GH for horizontal sheet metal/plate transport (corresponds to grade 10)
- Do 90 BVH sheet metal loading hooks for horizontal sheet metal/plate transport
- Plate hooks/plate angles BW for horizontal sheet/plate transport (corresponds to grade 10)
- Special plate hooks (grade 8)
- Toggle chain for sheet piles (grade 8)
Technical features:
- Made of polyurethane elastomer
- 80 Shore A
Dolezych magnetic edge protectors for ropes and chains
Technical features:
- Made of aluminum
- Red
Grade 8 and 10 compensating rockers
The balancing rockers for hangers:
- Uniform loading of the individual strands
- Perpendicular lifting of the load on multi-leg lifting-chains
- Compensation for inaccuracies in the arrangement of the attachment points and length tolerances of the chain strands
- Only one compensating rocker may be used per lifting-chain
- If one of two simultaneously used 2-leg lifting-chains is equipped with a compensating rocker, the system can also be assessed with four load-bearing legs
- If a compensating rocker is used, four-legged lifting-chains may only be calculated as load-bearing if the load dimensions are the same. The user must check this on site.
When using a 4-legged hanger in accordance with DGUV regulation 109-117: A factor of 4 may be used instead of 3 in accordance with the load capacity table if the following conditions are met:
- Symmetrical load distribution
- Stop angle β ≤ 45°
- Compensating position of the rocker < 10%
This results in higher load capacities for small chains: Due to even loading, smaller chains in the 4-strand can achieve a higher load capacity. The holes in the rocker are suitable for holding shackle pins and also for holding coupling links.
Container hooks
With our container lifting beams, ISO sea containers of different sizes can be lifted safely by crane. They are only used in pairs, whereby the right (R) and left (L) sides must be taken into account. These hooks are only to be used at the lower corners of the container. Please note that the straight container hooks are only suitable for vertical lifting.
Skip hooks and eyelets grade 8 and 10
Alternative names: skip handler, suspension hook, suspension eye
Grade 8 products are red and comply with the EN 1677-2 standard, while grade 10 products are turquoise and comply with DIN EN 1677-3. Both product variants are made of high-strength heat-treated steel, bear an H stamp, are individually marked (identification number/batch) and have been tested in accordance with DGUV.
These load handling attachments are used in almost all standard skip containers. They are used as end fittings for lifting-chains. This load handling attachment is hooked into the attachment devices provided on the container. The self-locking mechanism of the skip handler hook effectively prevents unintentional unhooking.
Spindle tensioner for lifting-chains
The spindle tensioner enables easy installation of the lifting-chain via the clevis connection without the need for separate connecting links. It is used for fine adjustment of the length and enables exact length compensation of chain strands. It is recommended that coarse shortening is only carried out with shortening hooks.
Technical features:
- Conformity with DIN EN 1677-1
- Made from high-strength heat-treated steel
- Grade 8, red
- With toggle/lever
- Marking: Identification no./Charge
- H-stamped (DGUV-tested)
It is important to note that over-tightening the anti-unscrewing device will destroy the spindle clamp and render it unusable or ready for discarding. In this case, the tensioner must be replaced. Also combine the spindle clamp with our DoClick. The DoClick replaces the clevis hook at the end and the upper shortening hooks are no longer required. Feel free to contact us.
Other chain accessories
- Chain gauge
- The 4-dimensional chain gauge
- Load plates GK 8
- Load plates GK 10
- Inspection sticker for next inspection
- Neutral plate
- Connector grade 8
- Shackle grade 8
- Suspension links grade 8
- Special suspension heads grade 8
- For single crane hooks no. 40
- Reducing hanger Grade 8
- Round steel chain & coupling link grade 10
- Suspension links grade 10