Large selection
Fast shipping
Top customer service

Rope-suspensions.

With different head and end fitting variants such as loops, thimbles and suspension links, your sling ropes can be combined to form rope-suspensions. By combining the composition of the variants according to your requirements, you can tailor the suspension gear specifically to your area of application. In the Dolezych store, you can easily buy the right rope-suspensions for you.

Seilgehänge 4-Strang
Seilgehänge
DoDra Stahlseile

Compiled for your area of application: head and end fitting variants for rope-suspensions

With these end connections, you can tailor your wire rope slings specifically to your area of application:

  • 1-leg and 2-leg suspension link
  • Suspension head 3-strand and 4-strand
  • Loop (cylindrical swaged, long conical swaged, spliced, Flemish eye)
  • Thimble (cylindrically pressed, spliced, Flemish eye)
  • End link
  • Shackle
  • Eye hook (GK5, GKB or self-closing OZ)
  • SIKA hook
  • Wide-mouth hook OW (for hot operation)
  • Swivel hook with ball bearing (rotatable under load)

Do you need other end connections not listed here? Then take a look at our bestseller catalog.

Important: The wide-mouth hook OW without safety device is not permitted in the construction sector, but only in hot workplaces such as foundries, steelworks and chain factories (DGUV 109-117).

Special accident hazards exist if the risk to the slinger when unhooking the load is significantly greater than the risk to insured persons when using a load hook without a hook safety device. Whether special accident risks exist requires a detailed examination in each individual case. They may be present, for example, when transporting molten masses or when placing loads in pickling baths.

Rope-suspensions 1- to 4-strand

Our galvanized (class B) rope-suspensions in accordance with DIN EN 13414 are all fitted with aluminium clamps and 6899 B wire rope thimbles. We offer the following rope-suspensions:

  • 1-strand rope-suspensions
  • 2-strand rope-suspensions
  • 3-strand rope-suspensions
  • 4-strand rope-suspensions

The suspension link is located at the upper end of the suspension gear, while the selected end fittings such as various hooks are located at the lower end. The thimbles are integrated at both ends.

We offer the following end connections:

  • Suspension link 1-fall and 2-fall
  • Suspension head 3-strand and 4-strand
  • Loop (cylindrical crimped, long conical crimped, spliced, Flemish eye)
  • Thimble (cylindrically pressed, spliced, Flemish eye)
  • End link
  • Shackle
  • Eye hook (GK5, GKB or self-closing OZ)
  • SIKA hook
  • Wide-mouth hook OW (for hot operation)
  • Swivel hook with ball bearing (rotatable under load)

Dolezych rope-suspensions have a load capacity plate with the following information

  • Manufacturer's mark DD
  • CE mark
  • Load capacity in kg for the inclination angle ranges ß from 0° to 45° and from 45° to 60°
  • Number of strands
  • Nominal rope diameter in mm
  • Date of manufacture

For work in corrosive environments: stainless steel rope-suspensions

The stainless steel suspension gear are equipped with DoVier stainless steel wire ropes and stainless steel end fittings. You can choose from 1 to 4 fall stainless steel rope-suspensions. The hangers are fitted with a COHF eye hook as standard. However, other end fittings such as shackles, swivel hooks or self-closing CMO safety eye hooks are also easily available.

Further information on stainless steel rope-suspensions

  • Material 1.4401
  • Design 7 x 19 wires
  • 570 N/mm²

Wire-rope adapter-slings for every application

With wire-rope adapter-slings, the eye and hook must be matched in size.

Wire-rope adapter-slings with a loop size of at least 15 x d are also suitable for use in large crane hooks:

  • In accordance with DIN EN 13414
  • Galvanized (class B)
  • With wire rope thimble 6899 B
  • With aluminum clamp (pressed)

Rope loops/concrete loops: DoAS rope loops with pressed-on threaded piece

Rope loops with thread

The threaded rope loops comply with VDI/BV-BS guideline 6205 "Lifting anchors and lifting anchor systems for precast concrete elements". The threaded rope loop is only suitable for axial tension and diagonal tension up to 45°. The threaded part is made of precision steel in bright finish and the rope loop is made of steel wire rope in galvanized finish.

Pay particular attention to:

  • Complete screwing in of the threads
  • Soiled threads of the threaded anchor and rope loops (please clean if soiled)
  • Discard criteria
  • Safety instructions

We are happy to advise you on rope-suspensions!

You can contact us at any time if you have any questions about rope-suspensions. We will help you find the right solution for your application. You can reach the team by phone on 0049 231 82 85 0 or by E-Mail at info@dolezych.de. You can also send us an inquiry directly.

Titelseite des Besteller-Katalogs

Can't find what you're looking for?

You can find all information about our products in our German bestseller catalog. As soon as an English version is available, you will find it here. If you have any questions about our products, please contact the Dolezych team.

To the German catalog

Send us an inquiry.

Request item
Images & documents

Fields marked with asterisks (*) are required.

Any questions?

Find your suitable specialist advisor:

Any questions?

Your personal advisor in the area %contactArea%

Please feel free to contact one of our numerous specialist advisors or take advantage of the callback service.