Clevis hook GS-DD, Size 13, Grade 80, 5,300 kg
- Load capacity: 5,300 kg
- Nominal size: 13
- Chain grade: 8
- Mouth width: 40 mm
- Standard: EN 1677
|
From
1
piece
|
€43.80
|
|
|---|---|---|
|
From
10
piece
|
€39.50
|
-10%
|
|
From
20
piece
|
€35.10
|
-20%
|
€35.10
Immediately ready for shipment
Clevis Hook GS‑DD – reliable clevis hook
The Clevis Hook GS‑DD supports you in safe lifting and transport tasks across a wide range of industrial applications. As a chain hook, it provides a precise and durable connection for lifting and load movements and integrates seamlessly into existing chain slings.
The Clevis Hook GS‑DD is built on a robust Grade‑8 steel construction, making it suitable for demanding and frequently recurring lifting operations. Its hook geometry ensures defined load engagement, while the stable safety latch reliably prevents accidental unhooking.
With an internal height of 147 mm, the hook integrates easily into standard chain assemblies and offers sufficient space for secure chain guidance. The 40 mm opening width supports accurate positioning when attaching loads and ensures controlled placement and guidance of the chain.
Designed for size‑13 chains, the hook offers a load capacity of 5,300 kg – making it suitable for typical lifting and handling tasks in assembly, logistics and manufacturing environments.
The DIN EN 1677‑1 standard confirms the technical approval of the component for professional lifting applications. In addition, the hook carries the DD marking for Dolezych Dortmund, indicating tested, standard‑compliant brand quality. The H‑stamp shows at a glance that all safety‑relevant requirements are fulfilled.
Technical Data
• Design: Clevis Hook GS‑DD
• Material: High‑strength steel, Grade 8, red coated
• Internal height: 147 mm
• Opening width: 40 mm
• Load capacity: 5,300 kg
• Standard: DIN EN 1677‑1
• Size: 13
• Markings: DD brand marking and H‑stamping
• Application: Attaching, guiding and positioning chain‑based loads
Accessories & Recommendations
For a complete lifting system, combine the clevis hook with suitable Grade‑8 chain slings. Matching coupling links, shortening claws or chain sling assemblies expand your setup as required.
Questions & Answers
Can I install the hook directly into an existing chain sling?
Yes, the clevis design enables quick mounting without additional components.
Is the hook suitable for daily industrial use?
Yes, the Grade‑8 construction is designed for demanding industrial loads.
Which chains are compatible?
The hook is designed for size‑13 chains.
| EAN | 4032378645220 |
| Commodity code | 73159000 |
| Composition | steel |
| ECLASS-Basic 15.0 (en) | 23.120.290 |
| chain-grade | 80 |
| colour | red |
| hook-version | GS |
| hook aperture (mm) | 40 |
| hook headroom (mm) | 147 |
| material-thickness hook bottom (mm) | 38 |
| material-width hook ground (mm) | 39 |
| nominal chain-size | 13 |
| standard | DIN EN 1677 |
| working load limit (kg) | 5.300 |
Hooks
1 Intended Use
The product is an accessory for load attachment used in lifting equipment or static systems and may only:
• be used by authorised and instructed personnel.
• be used in compliance with the applicable regulations.
It is expressly prohibited to:
• modify the product,
• have the product repaired by unqualified personnel,
• use the product for the transportation of persons.
2 General Safety Instructions
When lifting loads with lifting accessories, persons beneath or alongside the load are exposed to particular risks. Residual risks remain when using lifting accessories. These include in particular:
• an insufficiently secure connection between the lifting accessory and the load,
• swinging loads during lifting, and
• falling loads.
The following instructions must be observed to ensure safe handling of the product.
• Observe the maximum lifting capacity. The product must never be loaded beyond its specified lifting capacity.
• Observe the permissible temperature ranges.
• Avoid contact with acids and alkalis.
• Hooks must be inspected for visible damage (corrosion, deformation) before use.
• Hooks showing signs of deformation must not be used.
• Load hooks only in the bowl of the hook. Hooks must not be loaded at the tip unless specifically designed for that purpose.
• Hooks must not be subjected to bending forces. To avoid bending stresses, hooks must not rest on edges.
• Avoid shock loading and sudden impacts.
• Do not place loads on the product if this could cause damage to the product.
• Never drag the load across the product.
• Appropriate personal protective equipment (PPE) should be worn during all operations.
• The level of risk associated with offshore applications, the lifting of persons, hazardous loads (e.g. molten metals) or similar hazards must be assessed by a competent person as part of a risk assessment
Customers also bought.
Currently being reproduced
Seminars 2026.
