The Dolezych clevis hook WGSE is a hook designed for the safe lifting and moving of loads. With a nominal size of 10 and a load capacity of 4000 kg, it offers you the necessary strength and reliability for your lifting tasks. Manufactured in quality class 10, it stands for quality and durability. Its shape allows for an easy and secure connection to slings or other lifting equipment. With Dolezych you rely on proven quality and expertise in the area of slings. The WGSE clevis hook reliably supports you in all your lifting and transport projects.
| EAN | 4032378659753 |
| Commodity code | 73159000 |
| Composition | steel |
| ECLASS-Basic 15.0 (en) | 36.123.414 |
| chain-grade | 100 |
| colour | grey |
| hook-version | WGSE |
| hook aperture (mm) | 31 |
| hook headroom (mm) | 109 |
| material-thickness hook bottom (mm) | 33 |
| material-width hook ground (mm) | 25 |
| nominal chain-size | 10 |
| standard | DIN EN 1677 |
| working load limit (kg) | 4.000 |
Hooks
1 Intended Use
The product is an accessory for load attachment used in lifting equipment or static systems and may only:
• be used by authorised and instructed personnel.
• be used in compliance with the applicable regulations.
It is expressly prohibited to:
• modify the product,
• have the product repaired by unqualified personnel,
• use the product for the transportation of persons.
2 General Safety Instructions
When lifting loads with lifting accessories, persons beneath or alongside the load are exposed to particular risks. Residual risks remain when using lifting accessories. These include in particular:
• an insufficiently secure connection between the lifting accessory and the load,
• swinging loads during lifting, and
• falling loads.
The following instructions must be observed to ensure safe handling of the product.
• Observe the maximum lifting capacity. The product must never be loaded beyond its specified lifting capacity.
• Observe the permissible temperature ranges.
• Avoid contact with acids and alkalis.
• Hooks must be inspected for visible damage (corrosion, deformation) before use.
• Hooks showing signs of deformation must not be used.
• Load hooks only in the bowl of the hook. Hooks must not be loaded at the tip unless specifically designed for that purpose.
• Hooks must not be subjected to bending forces. To avoid bending stresses, hooks must not rest on edges.
• Avoid shock loading and sudden impacts.
• Do not place loads on the product if this could cause damage to the product.
• Never drag the load across the product.
• Appropriate personal protective equipment (PPE) should be worn during all operations.
• The level of risk associated with offshore applications, the lifting of persons, hazardous loads (e.g. molten metals) or similar hazards must be assessed by a competent person as part of a risk assessment
Safety catch for clevis hook WGSE
Currently being reproduced
Seminars 2026.
