Wire Rope Sold by the Meter 6×19 FC – Flexible, Strong, and Standards‑Compliant
This wire rope sold by the meter with a 6×19 construction and fiber core (FC) is a reliable solution for a wide range of applications in industry, trades, and engineering. Thanks to its balanced design, the steel wire rope combines high breaking strength, good flexibility, and long service life, making it ideal for everyday use.
Proven Rope Construction for Flexible Applications
The 6×19 FC construction offers an effective balance between flexibility and strength. The fiber core (FC) increases elasticity, protects the internal wires, and improves running characteristics on sheaves and drums. This makes the wire rope particularly suitable for applications involving repeated deflection.
High Strength for Safe Load Handling
With a wire tensile strength of 1,960 N/mm² and a minimum breaking force of 66.2 kN, this steel wire rope provides a solid safety margin. It delivers reliable performance for demanding technical applications.
Standards‑Compliant and Reliable
The wire rope is manufactured in accordance with EN 12385 (3060) and therefore meets the relevant requirements for industrial use. Supplied by the meter, it offers maximum flexibility when cutting to length and assembling.
Your Advantages at a Glance
- Wire rope sold by the meter for flexible length selection
- 6×19 construction with fiber core (FC)
- Ordinary lay sZ, right‑hand lay for smooth running and durability
- High wire tensile strength of 1,960 N/mm²
- Minimum breaking force: 66.2 kN
- Standards‑compliant according to EN 12385 (3060)
- Ideal for industry, mechanical engineering, and technical applications
Technical Data
- Rope construction: 6 × 19 wires
- Core: fiber core (FC)
- Lay type: sZ, ordinary lay, right‑hand
- Wire tensile strength: 1,960 N/mm²
- Minimum breaking force: 66.2 kN
- Weight per meter: 0.346 kg
- Standard: EN 12385 (3060)
- Supply form: sold by the meter
| EAN | 4032378764600 |
| Commodity code | 73121081 |
| ECLASS-Basic 15.0 (en) | 23.130.201 |
| greasing | dry |
| length (m) | 10 |
| nominal diameter of rope (mm) | 10 |
| rope-construction | round-braid rope 6 x 19 standard |
| rope-construction and -direction | sZ |
| rope-core | Fibre Core (FC) |
| rope tensile-class | 1960 N/mm² |
| standard | EN 12385 (-3060-) |
| weight per meter (kg) | 0,346 |
Please observe the following safety instructions:
Wire Rope by the Metre is used in a wide range of lifting and construction applications. To ensure safe handling and use, the following instructions must be observed:
1. Intended Application and Suitability
- Wire rope by the metre must only be used for its intended purpose (e.g. lifting, pulling or securing loads).
- Observe the specific technical characteristics of the wire rope (e.g. material, diameter, construction and minimum breaking load).
- Use only with suitable accessories and termination components (e.g. wire rope clips, ferrules) designed for the respective wire rope.
2. Before Use
- Visual inspection: Inspect the wire rope before each use for signs of damage (e.g. broken wires, crushing, rust, corrosion or deformation). Damaged wire ropes must not be used.
- Check load capacity: Ensure that the strength of the wire rope is appropriate for the intended load. Observe the required safety factors in accordance with applicable regulations and standards.
- Correct length: Ensure that the wire rope has the required length for the intended application and is not shortened while under tension.
3. Use
- Correct installation: Use wire ropes only with appropriate accessories (e.g. wire rope clips, sheaves or pulleys). These components must be correctly installed and secured.
- Direction of loading: Always load wire ropes in the intended direction and do not twist, kink or run them over sharp edges.
- No overloading: The specified minimum breaking load must not be exceeded.
- Regular inspection during use: During operation, monitor the wire rope for signs of overloading or damage.
4. Special Conditions
- Environmental influences: Wire ropes may be damaged by aggressive chemicals, elevated temperatures or excessive wear.
- Temperature suitability: Ensure that the wire rope is suitable for the ambient temperatures of the intended application.
5. Maintenance and Care
- Clean wire ropes regularly and inspect them for wear. If applicable, sheaves, pulleys and other rope guidance components should also be inspected.
- If the wire rope is damaged (e.g. broken wires), remove it from service immediately and replace it.
- Lubricate moving components (e.g. sheaves and pulley systems) where applicable to minimise wear.
6. Storage
- Store wire ropes in a dry, clean and corrosion-protected environment.
- Store wire ropes on reels or drums to prevent kinking and deformation.
- Avoid contact with chemicals that could adversely affect the material properties of the wire rope.
7. Additional Information
- Wire rope by the metre is a safety-critical product. Applicable regulations and standards (e.g. DIN EN 12385) must always be observed.
- In the event of improper installation or uncertainty regarding the application, consult the manufacturer or a wire rope specialist.
- Wire ropes must never be repaired. Damaged wire ropes must always be replaced in their entirety.
Seminars 2026.
