DoZurr 5000 Lashing Strap Loose End
Anyone needing to replace a worn strap section requires a suitable lashing strap loose end without replacing the entire lashing strap. The DoZurr 5000 loose end was developed as a replacement part for two-piece Dolezych lashing straps. This allows the existing fixed end with ratchet to continue being used, reducing downtime and unnecessary replacement costs.
Advantages & Applications
• Replaces worn loose ends on two-piece lashing straps and allows continued use of the existing fixed end with ratchet.
• The permissible lashing capacity of 2,500 daN supports compliant load securing within the specified operating limits.
• The polyester webbing offers low elongation of less than 5%, helping to maintain pre-tension during transport.
• The profile hook (also known as a triangle hook) enables attachment to suitable lashing and anchoring points.
• The 50 mm webbing width corresponds to a common specification used in professional transport and logistics applications.
• The 7.50 m length provides sufficient flexibility for many typical load securing tasks.
• The highly visible orange webbing facilitates visual inspection during use.
• As an original Dolezych replacement part, the loose end is designed for use with compatible Dolezych two-piece lashing straps.
Suitable if ...
• the loose end of a two-piece lashing strap is damaged or worn
• the fixed end with ratchet is to remain in service
• a version with a profile hook is required
• a compliant solution in accordance with DIN EN 12195-2 is needed
Technical Details
• Product name: DoZurr 5000
• Product type: Load restraint strap loose end
• Permissible lashing capacity (LC): 2,500 daN
• Elongation: < 5%
• Material: Polyester
• Webbing width: 50 mm
• Length: 7.50 m
• Hook: Profile hook (triangle hook)
• Webbing colour: Orange
• Standard: DIN EN 12195-2
FAQ
When should a loose end be replaced?
If the webbing shows damage, wear or other safety-relevant defects, the affected loose end should be replaced.
Can the existing fixed end continue to be used?
Yes. This loose end is intended as a replacement part so that a functional fixed end with ratchet does not need to be replaced.
Which accessories provide additional protection for the loose end?
Edge protectors, wear sleeves and, for securing heavy loads, anti-slip mats can be used to help protect the webbing.
The DoZurr 5000 loose end provides an economical solution for replacing worn loose ends while continuing to use existing lashing strap components that remain fit for service.DoZurr 5000 Load Restraint Strap Loose End
Anyone needing to replace a worn strap section requires a suitable load restraint strap loose end without replacing the entire lashing strap. The DoZurr 5000 loose end was developed as a replacement part for two-piece Dolezych lashing straps. This allows the existing fixed end with ratchet to continue being used, reducing downtime and unnecessary replacement costs.
Advantages & Applications
• Replaces worn loose ends on two-piece lashing straps and allows continued use of the existing fixed end with ratchet.
• The permissible lashing capacity of 2,500 daN supports compliant load securing within the specified operating limits.
• The polyester webbing offers low elongation of less than 5%, helping to maintain pre-tension during transport.
• The double j hook (also known as a triangle hook) enables attachment to suitable lashing and anchoring points.
• The 50 mm webbing width corresponds to a common specification used in professional transport and logistics applications.
• The 8.00 m length provides sufficient flexibility for many typical load securing tasks.
• The highly visible orange webbing facilitates visual inspection during use.
• As an original Dolezych replacement part, the loose end is designed for use with compatible Dolezych two-piece lashing straps.
Suitable if ...
• the loose end of a two-piece lashing strap is damaged or worn
• the fixed end with ratchet is to remain in service
• a version with a profile hook is required
• a compliant solution in accordance with DIN EN 12195-2 is needed
Technical Details
• Product name: DoZurr 5000
• Product type: Load restraint strap loose end
• Permissible lashing capacity (LC): 2,500 daN
• Elongation: < 5%
• Material: Polyester
• Webbing width: 50 mm
• Length: 8.00 m
• Hook: Profile hook (triangle hook)
• Webbing colour: Orange
• Standard: DIN EN 12195-2
FAQ
When should a loose end be replaced?
If the webbing shows damage, wear or other safety-relevant defects, the affected loose end should be replaced.
Can the existing fixed end continue to be used?
Yes. This loose end is intended as a replacement part so that a functional fixed end with ratchet does not need to be replaced.
Which accessories provide additional protection for the loose end?
Edge protectors, wear sleeves and, for securing heavy loads, anti-slip mats can be used to help protect the webbing.
The DoZurr 5000 loose end provides an economical solution for replacing worn loose ends while continuing to use existing lashing strap components that remain fit for service.
| EAN | 4032378230426 |
| Commodity code | 63079098 |
| Composition | PES |
| ECLASS-Basic 15.0 (en) | 20.420.204 |
| Field of application | Der Zurrgurt DoZurr 5000 eignet sich zum sicheren Transport und Fixieren schwerer Lasten auf LKW, Anhängern oder im Lager. Ideal für Industrie, Handwerk und Logistik, bietet er zuverlässige Stabilität und einfache Handhabung bei jedem Einsatz. |
| GS certified | Yes |
| colour | orange |
| end-fitting type long part | double j hook |
| lashing capacity (LC) in daN | 2.500 |
| material end-fitting | steel |
| nominal-length long part LGL (mm) | 8.000 |
| standard | DIN EN 12195-2 |
| tension | < 5,0% |
| type of lashing-strap | DoZurr 5000 |
| webbing width (mm) | 50 |
Seminars 2026.
